Red Bird Cabin

Robin’s Egg Blue wasn’t enough… here I go again with the blue-green hues.  I painted our bathroom Covington Blue (Benjamin Moore #HC-138) and I’m loving it.  (It reminds me of the bathroom in my Nana’s cottage on Martha’s Vineyard from many years ago.)  It’s cozy, beachy, summery… not too cool, not too warm, and works really well in a small space.

Covington Blue Bathroom

Because Covington Blue is deeper & darker than a Robin’s Egg Blue, I painted it only 3/4 of the way up the wall, trimming it off and using a soft white above.  For the white, my goal was to find a one very close in tone to the porcelain of my pedestal sink, tub & toilet.  And after about 7 sample jars of paint, the hands-down winner was White Dove (Benjamin Moore OC-17).  It’s the perfect bathroom white.  (I used satin on the walls, but semi-gloss for the cabinet and trim.)

Who knew that you could use shredded blue jeans as insulation?  I’m glad I found out… because the prickly, itchy, fiberglass insulation is gnarly to work with.  (It also leaves fiberglass dust all over your house which is hard to fully clean and isn’t good to inhale.)  I definitely recommend using Cotton Fiber Insulation instead. There are a few different brands out there. We used “UltraTouch” because we could buy it nearby, but they are all similar.

the joys of insulating

It’s safe, green and easy to work with. You just tear off chunks to fit snugly between the studs in the wall (the same way that you would with regular fiberglass insulation). Thick cotton insulation has a good R value too, so you can feel confident that it’s going to keep your house warm in the winter and cool in the summer. Here’s a helpful link you want more info on cotton versus fiberglass.  The cotton’s slightly more expensive than fiberglass, but so worth it if you have to touch the stuff yourself!

installing it is easy

It took us one day, amped on coffee and loud music, to tear out all the hideous green wall-to-wall carpeting.  And WOW, what a difference it’s made.  Tearing out carpet is easy, actually.  All you need is an exacto knife, needle nose pliers and some arm strength.  Begin with a corner and start pulling it loose.  When you get a manageable size chunk free (say 5 feet by 3 feet or so), use your exacto knife to slice that section off.  Throw it out the door so you have a clear workspace.  And continue carving off chunks.  If you’re comfortable removing bigger sections at a time, go for it.  Once you’re done, use your needle nose pliers to pry the carpet staples out of the floor.  Staple picking takes some time so you might want to sit/kneel on a pillow and have a good beer handy.

No more ugly carpet